Equipments - Monitor, Keyboard, Mouse, RAM, Hard Drive

Monitor
A monitor is really easy to put on, there is only two things you have to do.

Step 1: Put the Power port in to the monitor

Step 2: Put the AVG Cable in to the monitor

Step 3: you want to put the Monitor wire (Blue) in to the Desktop then you will be able to view what you're doing on the monitor.

That is how you put the monitor on.

Keyboard

They keyboard is really simple to put on but there is two different ports you can put it into. The modern way is the USB.

Step 1: All you have to do is put it in to the USB port in to the back of the computer.

Mouse

The mouse is really simple as well it is just like the keyboard, the more modern way is the USB input.

Step 1: Insert the mouse's USB it to the back of the computer's USB input.

RAM

The RAM Might be a bit tricky because there is clips that you need to UN-clip.


Step 1: Undo the clips there will be one on both sides, if you have one ram then just undo one, but if you have two then undo both. (blue ones)

Step 2: Then just put it in on the blue ones and you have to put it down with a little bit of pressure, after you do this you should here two clicks then you will  have to firmly put the clips in so the RAM is securely placed.

Step 3: Double check that the clips is firmly in place or you could lose a lot of work or the could be a lot of damage to your computer.

Hard Drive

This is the hard drive when it is plugged in, you have to make sure that is it firmly in place and the screws are all in or else it might not work.

This is the wire that is plugged in to the back without a wire being plugged in to the back it won't work.

This is the Hard drive completely out.